Need Taylormade exhaust review and advice.

[Nguyen.gixxer]

I have a k8 gsx-r 600 and I want to put the exhaust system on it. The taylormade exhaust look great, don't know about the sound yet. But I have been searching on the Internet and ppl said it has poor quality. Just only has the look. But I want to hear more from you guy. Should I go with other systerm.help me out guys. Thanks

Nguyen

[hondarider102]

Wirelessly posted

They look great but for the most part there loud and poor quality. Akrapovic or yoshimura are much better but usually don't look as nice

[CBR929RE]

Wirelessly posted

They look great but for the most part there loud and poor quality. Akrapovic or yoshimura are much better but usually don't look as nice

Akra not look nice, blashpemy!

[Nguyen.gixxer]

There is the guy want to sell me the whole Taylormade systerm for $500 ( used one ). I saw the price on their site about $1199. And do I need to install power commander or just only install the systerm? Cuz I saw on Internet PLO have the flame shooting out of the exhaust, is it any bad?

[cbr_chick_nh]

I have a TM on the Repsol. It by far is the best looking ... But for the price you pay you could get a better performer. Depends on what you want in an exhaust. I personally hate the way the bikes look with an exhaust - so the TM was an easy choice for me.
I also like the sound - not loud but loud enough

[Nguyen.gixxer]

I have a TM on the Repsol. It by far is the best looking ... But for the price you pay you could get a better performer. Depends on what you want in an exhaust. I personally hate the way the bikes look with an exhaust - so the TM was an easy choice for me.
I also like the sound - not loud but loud enough

No dout with the look bro!!

[drop]

go for taylormade
price is good for what you get
and flame is hot too

[hondarider102]

Wirelessly posted

Wirelessly posted

They look great but for the most part there loud and poor quality. Akrapovic or yoshimura are much better but usually don't look as nice

Akra not look nice, blashpemy!

In comparison. I run an akro on my bike, but hot bodies makes the best looking for my bike, all personal preference really, taylornadr just hides the can well generally as opposed I having a can clearly visible on the side of your bike or under tail

[cbr_chick_nh]

No dout with the look bro!!

[j4eric]

buy it, for 500.00 bucks, i think you can easily resell it if you dont like it....they sell quick, i think you will be fine for street riding.

[boloson]

I heard it had durability issues with rivets popping out after sometime. Is $500 for a full system?

[Billy]

I researched the crap out of Taylormade years ago when I was looking for an aftermarket exhaust for my 06 750. I discovered Taylormade has durability issues. Basically what Boloson said before me. I don't recommend Taylormade if you want an exhaust that lasts. I ended up keeping the stock exhaust on my gixxer for now but the Akra Shorty is mighty sexy!!!!

[Nguyen.gixxer]

I heard it had durability issues with rivets popping out after sometime. Is $500 for a full system?

Yes!! for full systerm. But he has been using it for 2 years. Worry that when it get to my turn the rivets popping out... Hahaha )

[Nguyen.gixxer]

buy it, for 500.00 bucks, i think you can easily resell it if you dont like it....they sell quick, i think you will be fine for street riding.

Should I buy it for $500 or should I save another $300 for the two bros systerm?? Wish TM make more quality products.. Really love the look tho.

[Billy]

You don't like?
Attachment 30097

[j4eric]

Should I buy it for $500 or should I save another $300 for the two bros systerm?? Wish TM make more quality products.. Really love the look tho.

look around, if somebody is selling a TM for 500.00 it would go fairly quick

[tropicoz]

I had one on my 07 G1K. Key word is had since I couldn't get rid of it quickly enough. It's loud and looks great for about six months, then the thing starts falling apart. I had to rebuild the damn thing just to resell it. The fit and finish is loose, all parts are stamped not machined, and the rivets are a joke. Seriously save yourself the headache and pass. Even the carbon trim pieces were very poorly made. Pin holes everywhere and crappy yellowing resin.

[Nguyen.gixxer]

look around, if somebody is selling a TM for 500.00 it would go fairly quick

Thanks for your advice!! i don't mind the selling part, just want a great looking and quality for my bike, just want to have a good one and stay with it. Hey but if he lower the price I may get it tho!! Good day mate.

[Nguyen.gixxer]

I had one on my 07 G1K. Key word is had since I couldn't get rid of it quickly enough. It's loud and looks great for about six months, then the thing starts falling apart. I had to rebuild the damn thing just to resell it. The fit and finish is loose, all parts are stamped not machined, and the rivets are a joke. Seriously save yourself the headache and pass. Even the carbon trim pieces were very poorly made. Pin holes everywhere and crappy yellowing resin.

Thanks!! Will pass this TM deal enup said.

[cbr_chick_nh]

I've had my TM on my 09 since purchase - and it's holding up nicely...

Just sayin'

[OreoGaborio]

Not a fan of Two Bros... quality product I guess, I just don't personally like the looks.

I prefer Akra, Leo Vince or Arrow. Those brands look and sound the tits. Quality is top notch, too.

[DaveZX6r]

too bad you don't have a 1k.

http://www.muzzys.com/catalog/specials/halfprice.html

[deninhodovalle]

For those looking for an exhaust with a similar look, you guys should try the CS Racing exhaust. I had 3 so far after exploding my Taylor made.

I share the same opinion as most buyers: https://csracingusa.com/pages/reviews